Experimental factors | Conditions | |
OCA | Cutting specimen of crushed hard sandstone (Standard density: 2.66 g/cm3, Water absorption ratio: 0.70%) | |
SMCP | W/C | 30% |
Modification materials | Cement, Fly ash (F/A), Blast furnace slag (BFS), Silica fume (S/F) | |
Replace ratio of modification materials (%) | Cement = 100 Cement + Fly-ash (F/A) = 70:30 Cement + Blast Furnace Slag (BFS) = 70:30 Cement + Silica-fume (S/F) = 90:10 | |
Cement matrix | Normal strength W/C = 55% | |
Interface angle | 30˚, 45˚, 60˚ |